Mobatime GNSS 4500 GPS 100m Time signal receiver GPS with DCF-77 time code output (UTC, CET).New generation of multi-satellite time signal receivers – GNSS 4500 is designed as an all-in-one device, i.e. antenna and receiver module are both located in the high-quality outdoor housing (IP 65).
Uncategorized
Mobatime GNSS 4500 GPS 100m Time signal receiver GPS with DCF-77 time code output (UTC, CET)
- The GNSS 4500 is designed to be a synchronization source for master clocks and time servers
1,090.00 AED 2,200.00 AED
Category:
Brand: Mobatime
Feature | Specification |
---|---|
GNSS | GPS, Galileo, GLONASS, BeiDou |
Frequency | L1 C/A, E1B/C, L10F, B1I |
Sensitivity | -166dBm (GPS), -159dBm (Galileo), -166dBm (GLONASS), -160dBm (BeiDou) |
Input voltage | 12 – 36VDC ±10% |
Power consumption | < 0.4W (< 40mA @ 12V) |
Operating temperature | -30 to +70°C (0 to 95% relative humidity, non-condensing) |
Standards | 2011/65/EU / 2014/53/EU |
Degree of protection | IP 65 |
Weight | approx. 200g |
Cable | Up to 200m, UV-protected, 4 wires, 0.25 mm² (AWG 23) |
Longer cable option | Possible with higher cross-section (up to 1mm²) |
Isolated output | Time code (UTC or CET, DCF coded) |
Satellites | 72 channel satellite tracking, min. 3 satellites required |
Accuracy of leading edge | Typically +/- 5μs (measured at output GNSS 4500) |
Synchronization time | < 5 minutes |
Signal reception LED | Reception/no reception (red: UTC, green: CET) |
There are no reviews yet.