RE-900 Series, Microprocessor based conventional Fire Alarm Control Panel, are designed to be used for medium and large size commercial complexes and industrial establishments.This panel can accommodate a range of 12 zones upto 128 zones.User friendly systems which involves a touch keypad to program the panel. This can be used as a standalone or networkable panel
-15%
FACPs
Ravel RE-9016 Fire Alarm 16 Zone Zontrol Panel
- Complies with UL-864 and NEPA-72.
- Operates on 120-220VAC 60/50 Hz, AC mains power supply.
- Standby (battery) backup 24 VDC power supply with built-in charger.
- Touch keypad for user-friendly operation.
- Epoxy powder coated finish.
- Class-B, Style B/C initiating device circuit (IDC).
- All zones accept smoke detectors and normal open contact devices.
- Class B notification appliance circuits (NAC).
- NAC shall be programmed as AUTO SILENCE/Silence Inhibit.
- Error-free Fire/Fault status in unambiguous colored LED indication.
- 1000 Event storage with RTC.
- Maximum 16 panels can be connected to a single network.
- 20 x 4 dot matrix LCD display.
- Peer to Peer network.
1,400.00 AED 1,647.00 AED
SKU: 100686
Category:
Brand: Ravel
| Primary Power: | 120 – 220VAC ? 10% | 60 / 50 Hz.450W |
| Stand by Power: | 24 VDC (2 X 12V Battery (for AH refer battery calculation) |
| Operating Condition: | Operating Temperature 0 – 49 C/32-120deg F | Storage Temperature -10degC to 50degC |
| Relative Humidity: | – 93 ? 2% RH (non- condensing) at 32 ?2? C/90 ?3? F |
| Charging Circuit: | Charging Voltage-28.0V | ?2% | Charging Current-1.2A(Max) |
| D.C. Output: | (Resettable / Steady) 24VDC Output | 1A Max. |
| Size: | (350W X 300H X 100D) mm |
Based on 0 reviews
Be the first to review “Ravel RE-9016 Fire Alarm 16 Zone Zontrol Panel”
Related products
-
FACPs
V-GREAT VG-6831/4 4 zone FACP Floor Zone Wise with Batteries
- High quality and reliable performance
- Up to 32 devices for each zone
- Up to 4 programmable supervised sounder circuits
- LED indication and key buttons
- One man walk-test and zone isolate facility
- DAY/NIGHT mode switchable
- Fault buzzer mute facility
- Fully programmable using simple menu options
- Keypad entry to a wide range of engineering functions
- Optional signal output board available for extension
- Three access levels settable via a key switch
- SMT and Microprocessor controller design
- Two-wire system to reduce cabling and installer friendly
- Compatible with a wide range of conventional devices
- LPCB approval to EN54-2 & EN54-4
SKU: 100700 -
FACPs
Ravel RE-102 Fire Alarm 2 Zone Control Panel- Conventional with Batteries
- As per IS-2189 Standard.
- Rugged CRCA sheet with powder coated finish.
- Standby battery backup with built-in charging.
- Fire/Fault status in unambiguous colored LED indication.
- Switch Mode Power Supply.
- Tactile Keypad for easy panel operation.
- System on indication.
- Main, Standby status indication.
- Low Battery visual warning with audible tone.
- Relay output for actuators for Fire and Fault.
- Lamp Test facility.
- Zone-wise one-man walk Test Facility.
- Zone-wise Isolation facility with loop voltage cut-off.
- Compatible with all types of Conventional Detectors.
SKU: 100683 -
FACPs
V-GREAT VG-6831/8 8 Zone Control Panel with Batteries
- High quality and reliable performance
- Up to 32 devices for each zone
- Up to 4 programmable supervised sounder circuits
- LED indication and key buttons
- One man walk-test and zone isolate facility
- DAY/NIGHT mode switchable
- Fault buzzer mute facility
- Fully programmable using simple menu options
- Keypad entry to a wide range of engineering functions
- Optional signal output board available for extension
- Three access levels settable via a key switch
- SMT and Microprocessor controller design
- Two-wire system to reduce cabling and installer friendly
- Compatible with a wide range of conventional devices
- LPCB approval to EN54-2 & EN54-4
SKU: 100698 -
FACPs
Electro Detectors 8 Zone Zerio Plus Control Panel EDA-Z5008
- Secure protocol with complex error checking
- 255 event log memory
- Date and Time displayed on screen
- Automatic Summer Time adjustment GMT / SMT
- Flash backed memory to prevent loss of operating data
- Non-volatile storage of set-up information
- 5 Level access code to help assist in commissioning the system
- Both sounder tones and sounder zones are uniquely programmed
- Programmable test modes
- Program firmware upgradeable via PC / USB memory stick
- Pre-alarm and head dirty warnings
- En54 Certified240 Fully Addressable Devices
- Sophisticated Cause and Effects
- In-built HMO options
- Pluggable Memory Module for Back-up
- USB Keyboard to program
- Configuration Reporting via USB Memory Stick
- Intuitive Menu Structure5 Access Levels
- Compatible with full range of Zerio Plus Devices
- Simple to Set-up
SKU: n/a
There are no reviews yet.